© Oilfree Lubricants Ltd 2012  IRMCO® is the registered trademark of IRMCO INC  USA

OILFREE LUBRICANTS LTD

THE COMPLETE ALTERNATIVE TO TRADITIONAL METAL FORMING OILS

TEL 01604 624860

FAX 01604 570782


IRMCO 980-000 TUBE BENDING GEL.


980-000 is a fully synthetic alternative to oil and pigmented paste lubricants for demanding mandrel tube bending operations. It is approved by Airbus for mandrel draw bending on stainless steel and cold drawing titanium.

980-000 provides a micro-layer of lubricating film on metal surfaces, between mandrel body and tube wall. The unique chemical nature and thick viscosity of 980-000 translates to the product “staying put”, resulting in less lubricant dripping off of machinery and less “weeping” of lubricant onto floors. These characteristics allow for the product to be applied in lower volume –at least 50% less when compared to oil, thus reducing lubricant consumption and lowering process costs.

For cleaning of parts to aerospace standards, a mild akaline aquous cleaning process is all that is required.

Ideal Stainless Steel, Titanium and Inconel.

Will draw bend all of these materials, with correct tooling down to 1D CLR.


For advice on your particular application email technical@oilfreelubricants.co.uk


TO USE CONTACT FORM

IRMCO AEROSPACE APPROVED LUBRICANTS


Below is a list of the most common categories of application. If you have a different requirement please get in touch.We offer credit accounts to approved regular customers, but if you wish to order a single amount you can purchase directly from the website, details alongside product.

IRMCO 980-080 METAL FORMING FLUID


980-080 is a fully synthetic alternative to oil and pigmented paste lubricants for  mandrel tube bending operations of aerospace pipes. It is approved by Airbus for mandrel draw bending on stainless steel and cold drawing titanium and aluminium.

980-080 provides a micro-layer of lubricating film on metal surfaces, between mandrel body and tube wall. The unique chemical nature of 980-080 translates to matching the performance of aerospace traditional oils, with the added advantage that cleaning to aerospace standards can be achieved with a mild akaline aqueous system.

Ideal for Stainless Steel, Titanium and Aluminium.


Please note when bending aluminium hard chrome mandrels only, should be used.


For advice on your particular application email technical@oilfreelubricants.co.uk


TO USE CONTACT FORM


CLICK HERE

CLICK HERE

IRMCO 980-000 5 litres £41.50

IRMCO 980-000 20 litres £158.00

Prices exclude VAT and shipping costs

IRMCO 980-080 10 litres £210.40

IRMCO 980-080 20 litres £420.80

Prices exclude VAT and shipping costs