IRMCO 980-080-10 Metal forming Fluid is an oil free alternative to traditional metal forming oils.


Suitable for a range of pressings with light forming operations such as,  mild steel forming of small brackets, roll forming, aluminium punching and blanking.


Used for high speed perforating on steel and aluminium.


Can be used in applications to replace vanishing oils as 980-080-10 will leave minimal residue and will weld without washing, even on stainless steel.


Applied by brush or roller and automatic spray systems.

If parts need cleaning, any aqueous cleaning system is ideal as recommended cleaning product is plain water.


For advice on your particular application please email technical@oilfreelubricants.co.uk

Or fill in our contact form.

IRMCO 980-080-20 Metal forming Fluid is an oil free alternative to traditional metal forming oils.

A very versatile general purpose lubricant, ideal for drawing, forming and stamping a wide range of pressings, in mild steel, aluminium and stainless.


Applied in a thin film, will leave minimal residue and is compatible with paint and plating systems.


Easily cleaned with plain water so any aqueous system will produce excellent results.


For advice on your particular application email technical@oilfreelubricants.co.uk or fill in our contact form.

IRMCO 980-146-20 Metal forming Fluid is an oil free alternative to traditional metal forming oils.


IRMCO 980-146-20 developed for Advanced High Strength Steels (AHSS) EN10149 S355MC or UK BS1449 40/35 up to grade 350.


Approved by Renault/Nissan for advanced high strength steel pressings.


This high temperature product will give excellent results with these abrasive materials and is suitable for drawing , forming punching and blanking.


Welds straight from the press without any porosity or weld fume problems.



For advice on your particular application email details to technical@oilfreelubricants.co.uk


IRMCO 980-156-20 Metal forming Fluid is an oil free alternative to traditional metal forming oils.


IRMCO 980-156-20 is the ideal oil free lubricant for blanking, piercing and forming stainless steel and AHS steel.


It has great abrasive quality and is use extensively for high speed perforating of stainless steel.


Used for producing high volumes of items such as wall ties, washers, clips and springs. Leaves very little residue if applied in a thin film and can produce a dry finished part.


Will weld without washing.


For advice on you particular application please email details to technical@oilfreelubricants.co.uk

IRMCO 980-32320


Even after inventing the synthetic lubricant category over 30 years ago, IRMCO has never stopped innovating.

 

With the oil crisis and global chemical pricing on the rise, we understand the pricing pressures placed on our clients. The market needs a new dynamic oil free product that is affordable but also can be used for multi purposes.


That product is IRMCO FLUIDS 980-32320. The product is a completely new chemical architecture for IRMCO and has already seen tremendous market success.

 

This is a medium viscosity, high performance product, which is easily removed with a plain water wash.


 Even at low applications, 980-32320 provides uniform wettability and superior metal forming lubrication.


The first oil free metal forming lubricant to be approved by Ford Motor Company.


Ideal for mild steel, galvanised and stainless steel.


For advice on your particular application email details to technical@oilfreelubricants.co.uk.



IRMCO METAL PRESSING FLUIDS


Below is a list of the most common categories of application. If you have a different requirement please get in touch.


We offer credit accounts to approved regular customers, but if you wish to order a single amount you can purchase directly from the website, details alongside product.

IRMCO 980-080-20 METAL FORMING FLUID.


IRMCO 980-080-20 Metal forming Fluid is an oil free alternative to traditional metal forming oils.


A very versatile general purpose lubricant, ideal for drawing, forming and stamping a wide range of pressings, in mild steel, aluminium and stainless.


Applied in a thin film, will leave minimal residue and is compatible with paint and plating systems.


Easily cleaned with plain water so any aqueous system will produce excellent results.


For advice on your particular application email technical@oilfreelubricants.co.uk


TO USE CONTACT FORM



IRMCO 980-156-101 METAL FORMING FLUID


980-156-101 is the ideal replacement for evaporating oils. A thin light application hides the impressive lubricating attributes of this fluid.


980-156-101 will punch and form an impressive range of products in, Mild steel and stainless steel.


The ideal non-oil lubricant to produce virtually dry pressings.


Used extensively in industries such as building product manufacturers, door and window fittings, small brackets and washers.


For advice on your particular application email technical@oilfreelubricants.co.uk


TO USE CONTACT FORM

IRMCO 980-156-20 METAL FORMING FLUID


980-156-20 is a more powerful version of 101 and is ideal for drawing, punching, forming and heavy duty blanking.


An ideal lubricant for abrasive applications, such as progression blanking and forming operations. Suitable for Mild Steel and Stainless Steel.


Applied in a thin film it will replace viscous oils in very demanding applications.


Offers very good properties in delaying abrasive wear, in high speed punching and blanking. Outperforms oils where high temperatures are produced by the tooling process, particularly stainless steel.


For advice on your particular application email technical@oilfreelubricants.co.uk


TO USE CONTACT FORM



IRMCO 980-323-20 METAL FORMING FLUID


IRMCO 980-32320

Even after inventing the synthetic lubricant category over 30 years ago, IRMCO has never stopped innovating.

With the oil crisis and global chemical pricing on the rise, we understand the pricing pressures placed on our clients. The market needs a new dynamic oil free product that is affordable but also can be used for multi purposes.

That product is IRMCO FLUIDS 980-32320. The product is a completely new chemical architecture for IRMCO and has already seen tremendous market success.

This is a medium viscosity, high performance product, which is easily removed with a plain water wash.

Even at low applications, 980-323-20 provides uniform wet-ability and superior metal forming lubrication.

The first oil free metal forming lubricant to be approved by Ford Motor Company.

Ideal for mild steel, and stainless steel.


For advice on your particular application email details to technical@oilfreelubricants.co.uk.

TO USE CONTACT FORM



CLICK HERE

CLICK HERE

CLICK HERE

CLICK HERE


 © Oilfree Lubricants Ltd 2012  IRMCO® is the registered trademark of IRMCO INC  USA

OILFREE LUBRICANTS LTD

THE COMPLETE ALTERNATIVE TO TRADITIONAL METAL FORMING OILS

TEL 01952 671119